Which international B2B payment methods should an Indian SME offer its buyers?
By Kumar Shanu · Published · 7 min read
Not legal, tax or investment advice.
For invoices between businesses, a bank transfer is the norm: a SWIFT wire to your Indian bank, or a local payment (ACH, SEPA, Faster Payments) to a receiving account in your name abroad. Cards and PayPal are convenient for small or one-off buyers but cost several per cent: PayPal India publishes 4.40% + USD 0.30 on international commercial payments plus a 3.0% conversion spread. Pick by invoice size, how often the buyer pays, and what their finance team can send.
Indian exporter or freelancer? Payzoplus gets you paid from abroad, in rupees.Open a free account →
On this page
What are the international B2B payment methods?
An Indian SME selling to businesses abroad can be paid in five broad ways. Each moves money differently and charges in a different place, so the right one depends on the buyer as much as on you.
- SWIFT wire to your Indian bank. The buyer’s bank sends a cross-border wire, often through one or more correspondent banks, to your current account in India, where your bank converts it to rupees.
- Local rails to a receiving account. You give the buyer account details in their own country, in your business’s name, held through a regulated provider. The buyer pays as they would a local supplier, by ACH in the US, SEPA in the euro area or Faster Payments in the UK.
- Cards through a payment gateway. The buyer pays an invoice by card on a payment page. Useful for small amounts and for buyers who expense purchases on a company card.
- PayPal and similar wallets. The buyer pays from a wallet balance, card or linked bank. Familiar to small buyers, expensive for regular invoices.
- Marketplaces and freelance platforms. The platform collects from the buyer and pays you out, after its own fees. You usually have no choice of rail.
How a local-rail payment reaches an Indian exporter
Buyer’s bank
Pays by ACH, SEPA or Faster Payments
Receiving account
In your business’s name, abroad
Conversion to rupees
By an RBI-regulated entity
Your Indian account
With a remittance advice (FIRA)
What does each method cost?
Only some costs are published. The table below uses fees the operators publish themselves, as checked on 30 October 2026. It shows what a buyer or seller is charged, not the exchange-rate margin hidden in a bank’s rate, which no one publishes as a number.
| Method | Published charge (as checked 30 October 2026) | Who publishes it |
|---|---|---|
| PayPal: receiving an international commercial payment | 4.40% + USD 0.30 per payment; conversion at 3.0% above PayPal’s base rate | PayPal India fee page, last updated 28 March 2024 |
| Card gateway: cards issued outside India (Visa, Mastercard) | 3%, plus 2% if currency conversion is needed | Stripe India pricing page |
| Card gateway: American Express issued outside India | 3.5%, plus 2% if currency conversion is needed | Stripe India pricing page |
| SWIFT wire: buyer’s outgoing fee (US bank example) | USD 45 for a business USD wire; foreign-currency wires carry an exchange-rate mark-up instead | Bank of America Business Schedule of Fees, effective 20 February 2026 |
| SWIFT wire: buyer’s outgoing fee (US bank example) | USD 40 online, USD 50 with a banker, for a consumer USD wire | JPMorgan Chase, Additional Banking Services and Fees, effective 14 June 2026 |
| Local account details at a money-transfer firm | No receiving fee for most domestic payments, except USD domestic wires; a fee for SWIFT receipts in most currencies | Wise India business pricing page (no amounts shown) |
Two things stand out. Card and wallet fees are percentages, so they grow with the invoice: on a USD 10,000 invoice, 4.40% is USD 440 before conversion. Wire fees are mostly flat, so they hurt small invoices more than large ones, while the bigger cost of a wire is usually the conversion margin. The Financial Stability Board’s 2025 progress report put the average cost of a B2B cross-border payment at about 1.6% on the sender’s side, with most of that cost coming from foreign exchange. The guide to SHA, OUR and BEN wire charges shows how to work out what a wire actually cost you.
How do the methods compare beyond price?
Five ways to be paid by a business abroad
| SWIFT wire | Local rail to a receiving account | Card | PayPal | Platform | |
|---|---|---|---|---|---|
| Who starts it | Buyer’s bank | Buyer’s bank | Buyer, on a payment page | Buyer, from a wallet | Buyer, on the platform |
| How fees are set | Flat fees plus FX margin | Depends on the provider | Percentage of the payment | Percentage + fixed fee + spread | Platform’s own fees |
| Can arrive short? | Yes, intermediary deductions | Rarely, on domestic rails | Net of fees | Net of fees | Net of fees |
| Can be reversed? | Only by agreement or recall | Only by agreement or recall | Yes, chargeback | Yes, dispute or chargeback | Per platform rules |
| Suits | Large, infrequent invoices | Regular invoices from one country | Small or one-off buyers | Small or one-off buyers | Work found on the platform |
Reversibility matters as much as cost for an exporter. A card payment can be charged back through the card network’s dispute rules months after you shipped or delivered, and a PayPal buyer can open a dispute. A bank transfer has no equivalent buyer-initiated dispute process; the money moves only if the payer’s bank recalls it and you agree, or a court orders it. For goods that have already left India, that difference is real.
Also readHow to receive international payments in India (2026 guide for exporters and freelancers)Which method fits which kind of buyer?
| Buyer and deal | Usually best | Why |
|---|---|---|
| A US distributor paying monthly invoices of USD 5,000–50,000 | Local rail (ACH) to a USD receiving account, or a wire | Their accounts-payable team pays suppliers by ACH every week; a flat cost per payment |
| A German company paying a one-time EUR 80,000 machinery order | Wire, or a letter of credit for the first order | One payment, large amount; security matters more than a few euros of fees |
| A UK agency paying a GBP 1,200 retainer | Faster Payments to a GBP receiving account | Domestic, instant, and the buyer sees your business name confirmed |
| A small overseas reseller ordering samples worth USD 300 | Card or PayPal | Convenience outweighs the percentage on a small order |
| A client you found on a freelance platform | The platform | Its terms usually require payment through it |
Large one-off goods orders from a new buyer raise a different question: not how to receive the money, but how to be sure it comes. That is where advance payment, documentary collection or a letter of credit comes in, and where payment terms matter more than the rail.
What does India require, whichever method you choose?
The method changes the cost, not the compliance. Every foreign-currency receipt against an export reaches you through an RBI-regulated entity: your authorised dealer bank, or a cross-border payment aggregator (PA-CB) that RBI regulates under its September 2025 Master Direction, which caps PA-CB transactions at ₹25 lakh each. The same rules then apply:
- The payment carries a purpose code that matches the invoice, such as P0102 for goods export bills sent on collection, or a services code like P0802 or P0807.
- Goods exports are declared on the shipping bill; services exports on an Export Declaration Form within 30 days of the end of the invoice month.
- The full value must be realised within 9 months (12 if invoiced in rupees).
- You keep the bank’s or aggregator’s remittance advice, the FIRA, as proof of each receipt.
Platforms and wallets add one practical risk: the payment may arrive in India as a bulk payout from the platform, not from your buyer, which makes it harder to match to each invoice. Ask any platform what remittance advice it provides before you rely on it for regular exports.
How do you choose, step by step?
Choosing a payment method for a new overseas buyer
- 1
Ask how they pay suppliers
Most finance teams have a default: ACH, SEPA, wire or card. Fitting their process gets you paid sooner.
- 2
Size the invoice
Percentage fees (cards, wallets) hurt large invoices; flat fees (wires) hurt small ones.
- 3
Count the payments
Regular payments from one country justify a local receiving account in that currency.
- 4
Weigh the risk
For goods shipped to a new buyer, consider advance or an LC; for cards, allow for chargebacks.
- 5
Check the paperwork
Confirm you will get a remittance advice per payment, with the right purpose code.
- 6
Put it on the invoice
One set of payment details per buyer, stated clearly, and confirmed by phone if they ever change.
If most of your buyers sit in a few countries, a receiving account in each currency lets them pay you locally while you keep one set of Indian records. Payzoplus offers receiving accounts in your business’s name, held through an RBI-authorised payment partner, with the bank’s FIRA passed on for each settlement.
How Payzoplus helps you
How Payzoplus makes cross-border payments simpler
- A USD account in your business name for each overseas customer, so they pay you over ACH or Fedwire like a local payee, and over SWIFT elsewhere.
- US dollars from day one, and 25+ more currencies once multi-currency is approved on your account.
- Your rate is shown beside the mid-market rate before you convert, so you see exactly what the conversion costs.
- Rupees reach your own bank account on T+1 after you reconcile.
No setup fee · No monthly fee · Verification usually takes one working day
Frequently asked questions
What is the cheapest way for an Indian business to receive international B2B payments?
It depends on the invoice. For regular invoices from one country, a local payment to a receiving account usually avoids intermediary deductions; for a large one-off payment, a wire’s flat fee matters less. Compare the exchange rate you get with the mid-market rate, because the conversion margin is often the biggest cost.
How much does PayPal charge an Indian seller for an international payment?
PayPal India’s fee page (last updated 28 March 2024, checked October 2026) lists 4.40% + USD 0.30 for receiving an international commercial payment in US dollars, and a conversion spread of 3.0% above its base rate.
Should I accept card payments from overseas business clients?
For small or one-off invoices, it can be worth it for convenience. Remember that card fees are a percentage of the payment and that card payments can be charged back through the card network’s dispute process.
Does the payment method change my FEMA or GST obligations?
No. The purpose code, the shipping bill or EDF, the 9-month realisation period and the remittance advice apply whichever method the buyer uses.
Sources
The primary texts this article was checked against, on 30 October 2026.
- PayPal India — PayPal fees for business (last updated 28 March 2024; checked 30 October 2026)
- Stripe India — pricing (checked 30 October 2026)
- Wise India — business pricing: receiving money (checked 30 October 2026)
- Bank of America — Business Schedule of Fees (effective 20 February 2026)
- JPMorgan Chase — Additional Banking Services and Fees (effective 14 June 2026)
- FSB — G20 Roadmap consolidated progress report for 2025 (9 October 2025)
- RBI — Master Direction on Regulation of Payment Aggregators, 15 September 2025
- RBI — Purpose codes for reporting forex transactions (receipts)
General information, not tax, legal or investment advice. Rules and products change: confirm the details for your business with your CA, your bank or the regulator.
How useful was this article?
Be the first to rate it.

Comments
Be kind and stay on topic. Comments with links or contact details are checked before they appear.